The Midtherm Trim Rings are used to tidy holes cut in the wall or ceiling.
Offered as a single piece to fit during the flue installation or in two half-pieces to fit after the flue installation.
Th...
The Midtherm HTS Guy Wire Bracket provides 3 fixing points for use with guy wires to enable lateral support of a vertical flue.
To be used with the Midtherm HTS Guy Wire Kit.
INSTALLATION MANUAL D...
The Midtherm HTS Wall Band Extension Kit is a pair of extension arms to be used with any diameter wall band, which allow for clearance from the wall in the range of 50-100mm.
INSTALLATION MANUAL DO...
The Midtherm HTS TW/SW Adaptor is used to provide lateral support for a vertical flue. This standard lenght wall band gives 50mm clearance from a wall.
INSTALLATION MANUAL DOWNLOAD - PDF
Midtherm ...
The Midtherm HTS Ventilated Top Plate is a non supporting ventilated top plate is for use where the flue system penetrates floors but no load bearing support is required.
Made of mild steel.
INSTAL...
The Midtherm HTS Storm Collar is meant to be clamped around the pipe, with a bead of silicone mastic, just above the flashing plate. It works as a weathering skirt.
The cravat version is the narrow...
