The Midtherm HTS Ventilated Support Plate is a load bearing support and it must be positioned every six metres.
Made of mild steel.
INSTALLATION MANUAL DOWNLOAD - PDF
Midtherm HTS Twin Wall - Hig...
The Midtherm HTS Storm Collar is meant to be clamped around the pipe, with a bead of silicone mastic, just above the flashing plate. It works as a weathering skirt.
The cravat version is the narrow...
The Midtherm HTS Double Inverted Cowl offers basic protection from rain and also blocks the wind from negatively affecting the flue draft.
INSTALLATION MANUAL DOWNLOAD - PDF
Midtherm HTS Twin Wall...
The Midtherm HTS 45° Elbow provides a change of direction, measured from the vertical by the specified angle. These are often used as an offset around gutters and fascia boards.
INSTALLATION MANU...
Lengths that can be used as an extension of a single wall flue system when passing through the ceiling or the wall.
The Midtherm HTS Twin Wall 800mm Length is a single length of twin wall pipe that...
The Midtherm HTS Wall Sleeve is designed to go straight through the wall to shield the twin wall flue against coming into contact with combustible material and to maintain the required air gap arou...
