Lengths that can be used as an extension of a single wall flue system when passing through the ceiling or the wall.
The Midtherm HTS Twin Wall 300mm Length is a single length of twin wall pipe that...
The Midtherm Trim Rings are used to tidy holes cut in the wall or ceiling.
Offered as a single piece to fit during the flue installation or in two half-pieces to fit after the flue installation.
Th...
The Midtherm HTS Guy Wire Bracket provides 3 fixing points for use with guy wires to enable lateral support of a vertical flue.
To be used with the Midtherm HTS Guy Wire Kit.
INSTALLATION MANUAL D...
The Midtherm HTS Wall Band Extension Kit is a pair of extension arms to be used with any diameter wall band, which allow for clearance from the wall in the range of 50-100mm.
INSTALLATION MANUAL DO...
The Midtherm HTS TW/SW Adaptor is used to provide lateral support for a vertical flue. This standard lenght wall band gives 50mm clearance from a wall.
INSTALLATION MANUAL DOWNLOAD - PDF
Midtherm ...
The Midtherm HTS Storm Collar is meant to be clamped around the pipe, with a bead of silicone mastic, just above the flashing plate. It works as a weathering skirt.
The cravat version is the wider ...
